https://kauilapele.wordpress.com/2015/01/16/cobra-update-1-16-15-planetary-situation-update/
In the European situation, the Eastern Alliance strikes back. First, in a not so surprising U-turn, Switzerland has de-pegged its currency from Euro wonderland and is joining the Alliance in preparing for the transition into the gold-backed financial system after the Reset:
---------- Forwarded message ----------
From: Glenn Meder <info@survivalstill.com>
Date: Thu, Jan 15, 2015 at 6:52 PM
Subject: Radiation Levels Dramatically Increasing (Update from Glenn at Survival Still)
Hi !
I hope all is well with you.
I wanted to start the year off with a very important 3-part article series about the increasing radiation levels in the US. Quite frankly, the latest news on this subject is shocking!
Last month, news reports reported that, “Data gathered from tracking units in California, Arizona, Illinois and elsewhere reveal radiation levels up to 50,000 percent higher than what was observed at the same time last year, and in some cases compared to levels seen this past summer.”
50,000 percent higher than normal!
Forgive my French, but Holy Schimoly! This is BIG news that will affect you and your family.
In this article series, I will explore this increase in radiation, show you what I have uncovered with my research and tell you some very practical things that you can do to protect your family. It really is fascinating, and to be honest, scary.
To see today’s article, click here. I will send you the second link tomorrow, and the third link over the weekend.
Also, I had some people request that I resend the link to the book that I recommended in November called, “How to Survive in a World without Antibiotics”. This is a very good book. His point is that, like it or not, bacteria are getting more and more resistant to antibiotics, so we need to know alternatives.
Glenn Meder
https://www.youtube.com/watch?v=Y-GWHU3rwME
A Public Proclamation establishing the Republic of Kanata was read today, January 15, 2015, in dozens of Canadian communities. "Crown" authority was disestablished and replaced by a sovereign Republic based on the common law and a High Court of Justice. A constitutional convention will inaugurate the Republican government between June 30 and July 3, 2015 in Winnipeg. Posted by the Provisional Council of the Republic. See www.republicofkanata.com , www.itccs.org .
http://www.openminds.tv/usaf-ufo-project-blue-book-files-go-online-free/31656
https://kauilapele.wordpress.com/2015/01/14/ufo-releasing-glowing-orbs-into-a-formation/
http://fractalenlightenment.com/33265/culture/animal-spirit-guide-the-sacredness-of-cats-and-dogs
https://kauilapele.wordpress.com/2015/01/13/cobra-update-1-12-15-the-return-of-light/
http://www.greenmedinfo.com/blog/magnesium-deficiency-symptoms-and-diagnosis
December 8: 6:00 PM. It started to snow. The first snow of the season and the wife and I sat for hours by the window watching the huge soft flakes drift down from heaven. It looked like a Grandma Moses print. So romantic, we felt like newlyweds again. I love snow!
December 9: We woke to a beautiful blanket of crystal-white snow covering every inch of the landscape. What a fantastic sight! Can there be a more lovely place in the whole world? Moving here was the best idea I've ever had. Shoveled for the first time in years and felt like a boy again. I did both our driveway and the sidewalks. This afternoon the snow plow came along and covered up the sidewalks and closed in the driveway, so I got to shovel again. What a perfect life.
December 12: The sun has melted all our lovely snow. Such a disappointment. My neighbor tells me not to worry; we'll definitely have a white Christmas. No snow on Christmas would be awful! Bob says we'll have so much by the end of winter that I'll never want to see snow again. I don't think that's possible. Bob is such a nice man. I'm glad he's our neighbor.
December 14: Snow, lovely snow! We had 8" last night. The temperature dropped to -20. The cold makes everything sparkle so. The wind took my breath away, but I warmed up by shoveling the driveway and sidewalks. This is the life! The snowplow came back this afternoon and buried everything again. I didn't realize I would have to do quite this much shoveling, but I'll certainly get back in shape this way. I wish I wouldn't huff and puff so.
December 15: 20 inches forecast. Sold my van and bought a 4x4 Explorer. Bought snow tires for the wife's car and two extra shovels. Stocked the freezer. The wife wants a wood stove in case the electricity goes out. I think that's silly. We aren't in Alaska, after all.
December 16: Ice storm this morning. Fell on my butt on the ice in the driveway putting down salt. Hurt like heck. The wife laughed for an hour, which I think was very cruel.
December 17: Still way below freezing. Roads are too icy to go anywhere. Electricity was off for five hours. I had to pile the blankets on to stay warm. Nothing to do but stare at the wife and try not to irritate her. Guess I should've bought a wood stove, but I won't admit it to her. I hate it when she's right. I can't believe I'm freezing to death in my own living room.
December 20: Electricity's back on, but we had another 14" of the stuff last night. More shoveling. Took all day. Snowplow came by twice. Tried to find a neighbor kid to shovel, but they said they're too busy playing hockey. I think they're lying. Called the only hardware store around to see about buying a snow blower and they're out. Might have another shipment in March. I think they're lying. Bob says I have to shovel or the city will have it done and bill me. I think he's lying.
December 22: Bob was right about a white Christmas because 13 more inches of the white stuff fell today, and it's so cold it probably won't melt till August. Took me 45 minutes to get all dressed up to go out to shovel and then I had to pee. By the time I got undressed, peed, and dressed again, I was too tired to shovel. Tried to hire Bob, who has a plow on his truck for the rest of the winter, but he says he's too busy. I think he's is lying.
December 23: Only 2" of snow today. And it warmed up to 0. The wife wanted me to decorate the front of the house this morning. What is she ... nuts??? Why didn't she tell me to do that a month ago? She says she did, but I think she's lying.
December 24: 6." Snow packed so hard by snowplow, I broke the shovel. Thought I was having a heart attack. If I ever catch that guy who drives that snowplow, I'll drag him through the snow by his hair. I know he hides around the corner and waits for me to finish shoveling and then he comes down the street at a 100 miles an hour and throws snow all over where I've just been! Tonight the wife wanted me to sing Christmas carols with her and open our presents, but I was busy watching for the snowplow.
December 25: Merry Christmas. 20 more inches of the slop tonight. Snowed in. The idea of shoveling makes my blood boil. I hate the snow! Then the snowplow driver came by asking for a donation and I hit him over the head with my shovel. The wife says I have a bad attitude. I think she's an idiot. If I have to watch "It's a Wonderful Life" one more time, I'm going to kill her.
December 26: Still snowed in. Why did I ever move here? It was all HER idea. She's really getting on my nerves.
December 27: Temperature dropped to -30 and the pipes froze.
December 28: Warmed up to above -20. Still snowed in. SHE is driving me crazy!!!
December 29: 10 more inches. Bob says I have to shovel the roof or it could cave in. That's the silliest thing I ever heard. How dumb does he think I am?
December 30: Roof caved in. The snow plow driver is suing me for a million dollars for the bump on his head. The wife went home to her mother. Another 9" predicted.
December 31: Set fire to what's left of the house. No more shoveling.
January 8: I feel so good. I just love those little white pills they keep giving me. Why am I tied to the bed?
NaturalNews) As someone who routinely considers the future ramifications of present-day trends, I'm always astonished when people are reluctant to acknowledge obvious trends. As I have begun to share here on Natural News in recent articles, 3D printing is rapidly taking shape as a revolutionary technology for liberty and freedom, but relatively few people are able to see that yet.
I see the implications of 3D printing revolution as clear as day, and over the last several months I've taken it upon myself to become extremely well-versed in a 3D design software product called Solidworks from Dassault Systems (www.Solidworks.com). I've also purchased four 3D printers (so far), printed hundreds of objects and tested nearly every filament available today.
In just a few short weeks, I'll be unveiling breakthrough new technology on www.FoodRising.com that will be freely distributed as downloadable files that people can print on their own 3D printers. This effort combines open source grassroots file sharing with revolutionary self-reliance "low tech" technology that will be widely embraced and shared all around the world.
As this is all taking shape, there are still some people who just don't get it. They think 3D printing is a "gimmick" that can only be used to print holiday decorations and cookie cutters. What they don't yet realize is that people like Cody Wilson have already successfully designed and shared functional firearms receivers that can fire live ammo (www.DefDist.org). This is not a gimmick. In fact, it was taken so seriously that top federal officials in the U.S. government freaked out and threatened Defense Distributed with criminal prosecutions.
Here's what else people don't yet understand: What I'm about to release are functional 3D printable inventions that have never existed before on our planet. These are unique devices based on innovative geometry that can only be printed via an additive manufacturing technology such as 3D printing -- a technology that builds layer upon layer in a vertical Z-axis arrangement. The resulting parts that I'm about to release can be assembled and used in non-electric systems that create astonishing abundance without using any motors, gears or electricity. Sign up at www.FoodRising.org to receive the official announcements which will start rolling out mid-February, according to the current schedule.
The reason I mention all this is because the AFP wire service recently put out a fascinating story entitled 3D printing could revolutionise war and foreign policy.
You can read the story at SpaceDaily.com. [1]
The opening paragraph summarizes the stunning realization that's now starting to sink in across mainstream thinkers:
3D printing will revolutionise war and foreign policy, say experts, not only by making possible incredible new designs but by turning the defence industry -- and possibly the entire global economy -- on its head.
The story goes on to explain just one "oh wow" realization in all this:
But the real revolution of 3D printing is less about the things you can make and more about where you make them. Being able to take printers to a warzone promises a radical shake-up of combat and the defence industry...
What this is referring to is the ability of soldiers on the battlefield to use frontline additive manufacturing units to churn out the physical objects they need to fight the war. Replace the word "soldiers" with "revolutionaries" and you come to realize just how much 3D printing might also be used everywhere around the world to put practical objects into the hands of people who are tied to a decentralized, distributed network (for good or bad, depending on the group). The implications in medicine, agriculture, security, exports and manufacturing are enormous. This will even heavily impact retail establishments like Wal-Mart.
But let's step back from war for a minute and think about what else is now possible with 3D printing. In some of my own designs, I have created objects with internal water paths that would be impossible to manufacture using drilling, injection molding or vacuum forming manufacturing techniques.
One of the objects I've designed can be printed for less than $1 in filament and yet replaces a far more expensive and complex part that typically requires metal parts and toxic manufacturing chemicals. YOU will be able to download this object file for free and print it yourself in just a few weeks. Consider the ramifications of this...
"[E]conomies that rely on cheap factory labour to make things like clothes and toys may find themselves in deep trouble," says the AFP article. Indeed, 3D printing will eventually make a very large sector of retail sales utterly obsolete. As a great example of this, when I recently purchased the FlashForge 3D printer, I found that the spool holders on the back of the printer were too large to fit the smaller spool holes in the spools for the t-glase filament that I was using. So what did I do? I quickly designed a replacement spool holder and printer it using Colorfabb XT material, and it's now holding the t-glase spool. Instead of buying this part, I simply made it myself.
And just to show you I'm not making this up -- because there are always naysayers who can't believe anything they didn't imagine first -- here's a photo of what I just described, exactly as it is currently installed in my 3D printing lab:
The black object in the photo is the original spool holder that comes with the printer. The white object is the custom spool holder I designed (in about two minutes) and printed (in about an hour). Inside that is a 1/2-inch PEX pipe that I'm using as a spool rod. The t-glase filament spool is in the background.
3D printing allows you to think of an object and then create it, bringing it into the physical world in a matter of minutes or hours. This technology has revolutionized my own thinking about what's possible. It has given me a new tool to use for mass empowerment of the People in a world where corrupt governments and evil corporations are desperately trying to take away your power.
The best way to think about 3D printing is that it changes the rules of the game. 3D printing is a so-called "disruptive technology," in much the same way that the invention of the musket was a disruptive technology that spurred a whole new age of revolutions and egalitarian systems of common law (i.e. democracy). When power is distributed into the hands of many (instead of concentrated in the hands of the few), freedom naturally follows. That's why 3D printing is such a freedom-promoting technology... and it's also why the criminally corrupt governments of the world are so freaked out about 3D printers and are desperately working on ways to try to outlaw the printing of certain objects.
The full picture in all this will all become much clearer after I release my upcoming inventions at www.FoodRising.org
Here's a picture of one of the actual prints taking place on a FlashForge printer in my lab:
After my Food Rising releases, it will be abundantly obvious to a whole new wave of people that 3D printing is a game changer on a whole new level. The practicality of the items that can be created with this technology is far, FAR beyond what most people are doing with it right now.
This AFP article finally nails it, saying " The full implications are still hard to imagine."
"It's the first time in a very long time that there's been such a radical shake up in industrial engineering," says Stevens at BAE. "We're not just improving things -- we're re-writing the rule book."
That's exactly my point. It's refreshing, in fact, to see a mainstream media article that actually "gets it."
Learn more: http://www.naturalnews.com/048227_3D_printing_global_revolution_decentralized_technology.html#ixzz3OFpugLiY
http://collectivelyconscious.net/articles/the-next-big-social-idea-unconditional-basic-income/
onenessofall.com
http://expandedconsciousness.com/2014/12/14/no-one-coming-save/#fgkGItdHD1KJXFYk.99
http://tinybuddha.com/blog/intentionally-embrace-change-new-year/
